Collection: UV-DTF GLASS CAN WRAPS

These are sized to fit the LIBBEY BRAND GLASS CANS. 

BE SURE TO DOUBLE CHECK THE SIZE YOU ARE BUYING. 

Not all brands are the same size. Please be aware of this!

UV Direct to film (DTF) transfers are the newest technology in customization, no more weeding, or printing vinyl.

One of the greatest benefits of these transfers is that they can go on so many surfaces such as tumblers, shot glasses etc. No heating is needed, these apply like a sticker using the carrier sheet that is already applied.

There is a white layer of ink on the back of each transfer as shown in our listings. This allows for the transfers to be put on various colors of surfaces.

Each vibrant UV DTF graphic leaves a high-quality design on your hard surfaces that stays vibrant wash after wash. For best results we recommend hand washing.


INSTRUCTIONS

Clean glass with alcohol and wait for to dry COMPLETELY (optional but helps with adherence)

Wrap around desired cup to make sure the transfer won’t overlap. Cut sides if necessary

Peel off backing and slowly place on cup (The adhesive is very strong. Once the transfer touches the glass its impossible to take off)

Press every part of the image with fingers or squeegee

Peel back transfer paper very slowly to make sure all parts of the image stick to the glass.

DONE! Wait a few hours (I recommend a full 24) before washing to make sure glue completely cures.

THESE ARE NOT MICROWAVE OR DISHWASHER SAFE! HAND WASH ONLY

We are not responsible for application mishaps.

*Please note: Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimeters. Our wraps have been measured to fit Libbey glass cans. Adjustments may be necessary*